Document qui ne produit pas de PDF - Nouvel ordinateur

Tout ce qui concerne l'utilisation ou l'installation de LaTeX.

Modérateur: gdm_tex

Règles du forum
Merci d'éviter le style SMS dans vos messages et de penser à utiliser la fonction Recherche avant de poster un message. Pour joindre des fichiers à vos messages, consulter ce sujet.
> Penser à utiliser les balises Code pour poster du code.

Document qui ne produit pas de PDF - Nouvel ordinateur

Messagepar Louise17 » Mercredi 06 Décembre 2017, 16:31

Bonjour,

je me permet de poster ici car je suis désespérée.

J'ai changé d'ordinateur et j'ai voulu transférer mes applications MikTeX et TexMaker sur mon nouvel ordinateur (je suis sous Windows 10).
Lorsque je lance la compilation rapide (pdflatex + voir pdf), un message apparaît furtivement puis est remplacé par le log :
Sorry but miktex-makemf did not succeed to the following rea
son : md-utr8y source file could not be found

Dans le doute, j'ai tout désinstallé et tout réinstallé mais c'est toujours le même problème, aucun pdf ne sort.
J'ai des messages de log mais je ne sais pas les déchiffrer et aucun message d'erreur de compilation ne s'affiche.

Je ne sais vraiment plus quoi faire pour que cela fonctionne à nouveau. Je fais tous mes documents de cours en LaTeX donc là c'est un peu la cata !

Merci d'avance de votre aide.

Louise




Voici ce j'obtiens :

Mon programme :

Code: Tout sélectionner
\documentclass[11pt]{article}%           autres choix : report, book
\usepackage[utf8]{inputenc}%       encodage du fichier source
\usepackage[T1]{fontenc}%          gestion des accents (pour les pdf)
\usepackage[english]{babel}%      rajouter éventuellement english, greek, etc.
\usepackage{textcomp}%             caractères additionnels
\usepackage{amsmath,amssymb,amsthm}%pour les maths
\usepackage{lmodern}
\usepackage[utopia]{mathdesign}%              remplacer éventuellement par txfonts, fourier, etc.
\usepackage[a4paper]{geometry}%    taille correcte du papier

\begin{document}
hello
\end{document}


LOG FILE :
This is pdfTeX, Version 3.14159265-2.6-1.40.18 (MiKTeX 2.9.6500 64-bit) (preloaded format=pdflatex 2017.12.6) 6 DEC 2017 16:22
entering extended mode
**./test.tex
(test.tex
LaTeX2e <2017-04-15>
Babel <3.15> and hyphenation patterns for 75 language(s) loaded.
("C:\Program Files\MiKTeX 2.9\tex\latex\base\article.cls"
Document Class: article 2014/09/29 v1.4h Standard LaTeX document class
("C:\Program Files\MiKTeX 2.9\tex\latex\base\size11.clo"
File: size11.clo 2014/09/29 v1.4h Standard LaTeX file (size option)
)
\c@part=\count79
\c@section=\count80
\c@subsection=\count81
\c@subsubsection=\count82
\c@paragraph=\count83
\c@subparagraph=\count84
\c@figure=\count85
\c@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
)
("C:\Program Files\MiKTeX 2.9\tex\latex\base\inputenc.sty"
Package: inputenc 2015/03/17 v1.2c Input encoding file
\inpenc@prehook=\toks14
\inpenc@posthook=\toks15
("C:\Program Files\MiKTeX 2.9\tex\latex\base\utf8.def"
File: utf8.def 2017/01/28 v1.1t UTF-8 support for inputenc
Now handling font encoding OML ...
... no UTF-8 mapping file for font encoding OML
Now handling font encoding T1 ...
... processing UTF-8 mapping file for font encoding T1
("C:\Program Files\MiKTeX 2.9\tex\latex\base\t1enc.dfu"
File: t1enc.dfu 2017/01/28 v1.1t UTF-8 support for inputenc
defining Unicode char U+00A0 (decimal 160)
(...)
defining Unicode char U+2423 (decimal 9251)
))
("C:\Program Files\MiKTeX 2.9\tex\latex\base\fontenc.sty"
Package: fontenc 2017/04/05 v2.0i Standard LaTeX package
("C:\Program Files\MiKTeX 2.9\tex\latex\base\t1enc.def"
File: t1enc.def 2017/04/05 v2.0i Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 48.
))
("C:\Program Files\MiKTeX 2.9\tex\generic\babel\babel.sty"
Package: babel 2017/11/03 3.15 The Babel package
("C:\Program Files\MiKTeX 2.9\tex\generic\babel\switch.def"
File: switch.def 2017/11/03 3.15 Babel switching mechanism
)
*************************************
* Local config file bblopts.cfg used
*
("C:\Program Files\MiKTeX 2.9\tex\latex\arabi\bblopts.cfg"
File: bblopts.cfg 2005/09/08 v0.1 add Arabic and Farsi to "declared" options of
babel
)
("C:\Program Files\MiKTeX 2.9\tex\latex\babel-english\english.ldf"
Language: english 2017/06/06 v3.3r English support from the babel system
("C:\Program Files\MiKTeX 2.9\tex\generic\babel\babel.def"
File: babel.def 2017/11/03 3.15 Babel common definitions
("C:\Program Files\MiKTeX 2.9\tex\generic\babel\switch.def"
File: switch.def 2017/11/03 3.15 Babel switching mechanism
)
\babel@savecnt=\count87
\U@D=\dimen103
)
\l@canadian = a dialect from \language\l@american
\l@australian = a dialect from \language\l@british
\l@newzealand = a dialect from \language\l@british
))
("C:\Program Files\MiKTeX 2.9\tex\latex\base\textcomp.sty"
Package: textcomp 2017/04/05 v2.0i Standard LaTeX package
Package textcomp Info: Sub-encoding information:
(textcomp) 5 = only ISO-Adobe without \textcurrency
(textcomp) 4 = 5 + \texteuro
(textcomp) 3 = 4 + \textohm
(textcomp) 2 = 3 + \textestimated + \textcurrency
(textcomp) 1 = TS1 - \textcircled - \t
(textcomp) 0 = TS1 (full)
(textcomp) Font families with sub-encoding setting implement
(textcomp) only a restricted character set as indicated.
(textcomp) Family '?' is the default used for unknown fonts.
(textcomp) See the documentation for details.
Package textcomp Info: Setting ? sub-encoding to TS1/1 on input line 79.
("C:\Program Files\MiKTeX 2.9\tex\latex\base\ts1enc.def"
File: ts1enc.def 2001/06/05 v3.0e (jk/car/fm) Standard LaTeX file
Now handling font encoding TS1 ...
... processing UTF-8 mapping file for font encoding TS1
("C:\Program Files\MiKTeX 2.9\tex\latex\base\ts1enc.dfu"
File: ts1enc.dfu 2017/01/28 v1.1t UTF-8 support for inputenc
defining Unicode char U+00A2 (decimal 162)
(...)
defining Unicode char U+266A (decimal 9834)
))
LaTeX Info: Redefining \oldstylenums on input line 334.
Package textcomp Info: Setting cmr sub-encoding to TS1/0 on input line 349.
(...)
Package textcomp Info: Setting ptmj sub-encoding to TS1/4 on input line 409.
)
("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsmath.sty"
Package: amsmath 2017/09/02 v2.17a AMS math features
\@mathmargin=\skip43
For additional information on amsmath, use the `?' option.
("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amstext.sty"
Package: amstext 2000/06/29 v2.01 AMS text
("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsgen.sty"
File: amsgen.sty 1999/11/30 v2.0 generic functions
\@emptytoks=\toks16
\ex@=\dimen104
))
("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsbsy.sty"
Package: amsbsy 1999/11/29 v1.2d Bold Symbols
\pmbraise@=\dimen105
)
("C:\Program Files\MiKTeX 2.9\tex\latex\amsmath\amsopn.sty"
Package: amsopn 2016/03/08 v2.02 operator names
)
\inf@bad=\count88
LaTeX Info: Redefining \frac on input line 213.
\uproot@=\count89
\leftroot@=\count90
LaTeX Info: Redefining \overline on input line 375.
\classnum@=\count91
\DOTSCASE@=\count92
LaTeX Info: Redefining \ldots on input line 472.
LaTeX Info: Redefining \dots on input line 475.
LaTeX Info: Redefining \cdots on input line 596.
\Mathstrutbox@=\box26
\strutbox@=\box27
\big@size=\dimen106
LaTeX Font Info: Redeclaring font encoding OML on input line 712.
LaTeX Font Info: Redeclaring font encoding OMS on input line 713.
\macc@depth=\count93
\c@MaxMatrixCols=\count94
\dotsspace@=\muskip10
\c@parentequation=\count95
\dspbrk@lvl=\count96
\tag@help=\toks17
\row@=\count97
\column@=\count98
\maxfields@=\count99
\andhelp@=\toks18
\eqnshift@=\dimen107
\alignsep@=\dimen108
\tagshift@=\dimen109
\tagwidth@=\dimen110
\totwidth@=\dimen111
\lineht@=\dimen112
\@envbody=\toks19
\multlinegap=\skip44
\multlinetaggap=\skip45
\mathdisplay@stack=\toks20
LaTeX Info: Redefining \[ on input line 2817.
LaTeX Info: Redefining \] on input line 2818.
)
("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\amssymb.sty"
Package: amssymb 2013/01/14 v3.01 AMS font symbols
("C:\Program Files\MiKTeX 2.9\tex\latex\amsfonts\amsfonts.sty"
Package: amsfonts 2013/01/14 v3.01 Basic AMSFonts support
\symAMSa=\mathgroup4
\symAMSb=\mathgroup5
LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
(Font) U/euf/m/n --> U/euf/b/n on input line 106.
))
("C:\Program Files\MiKTeX 2.9\tex\latex\amscls\amsthm.sty"
Package: amsthm 2015/03/04 v2.20.2
\thm@style=\toks21
\thm@bodyfont=\toks22
\thm@headfont=\toks23
\thm@notefont=\toks24
\thm@headpunct=\toks25
\thm@preskip=\skip46
\thm@postskip=\skip47
\thm@headsep=\skip48
\dth@everypar=\toks26
)
("C:\Program Files\MiKTeX 2.9\tex\latex\lm\lmodern.sty"
Package: lmodern 2009/10/30 v1.6 Latin Modern Fonts
LaTeX Font Info: Overwriting symbol font `operators' in version `normal'
(Font) OT1/cmr/m/n --> OT1/lmr/m/n on input line 22.
LaTeX Font Info: Overwriting symbol font `letters' in version `normal'
(Font) OML/cmm/m/it --> OML/lmm/m/it on input line 23.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/cmsy/m/n --> OMS/lmsy/m/n on input line 24.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal'
(Font) OMX/cmex/m/n --> OMX/lmex/m/n on input line 25.
LaTeX Font Info: Overwriting symbol font `operators' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 26.
LaTeX Font Info: Overwriting symbol font `letters' in version `bold'
(Font) OML/cmm/b/it --> OML/lmm/b/it on input line 27.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/cmsy/b/n --> OMS/lmsy/b/n on input line 28.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold'
(Font) OMX/cmex/m/n --> OMX/lmex/m/n on input line 29.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 31.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `normal'
(Font) OT1/cmss/m/n --> OT1/lmss/m/n on input line 32.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal'
(Font) OT1/cmr/m/it --> OT1/lmr/m/it on input line 33.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `normal'
(Font) OT1/cmtt/m/n --> OT1/lmtt/m/n on input line 34.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold'
(Font) OT1/cmr/bx/n --> OT1/lmr/bx/n on input line 35.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `bold'
(Font) OT1/cmss/bx/n --> OT1/lmss/bx/n on input line 36.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold'
(Font) OT1/cmr/bx/it --> OT1/lmr/bx/it on input line 37.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `bold'
(Font) OT1/cmtt/m/n --> OT1/lmtt/m/n on input line 38.
)
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mathdesign.sty"
Package: mathdesign 2013/08/29 v2.31 Math Design Project
("C:\Program Files\MiKTeX 2.9\tex\latex\graphics\keyval.sty"
Package: keyval 2014/10/28 v1.15 key=value parser (DPC)
\KV@toks@=\toks27
)
("C:\Program Files\MiKTeX 2.9\tex\latex\base\ifthen.sty"
Package: ifthen 2014/09/29 v1.1c Standard LaTeX ifthen package (DPC)
)
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdput\mdput.cfg")
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdput\mdput.sty"
Package: mdput 2013/08/29 v2.31 adobe utopia + mdput (Math Design Project)
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdfont.def"
File: mdfont.def 2013/08/29 v2.31 (Math Design Project)
)
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdsffont.def"
File: mdsffont.def 2013/08/29 v2.31 (Math Design Project)
)
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdttfont.def"
File: mdttfont.def 2013/08/29 v2.31 (Math Design Project)
)
\symmdcal=\mathgroup6
LaTeX Font Info: Overwriting symbol font `mdcal' in version `bold'
(Font) OMS/mdput/m/n --> OMS/mdput/b/n on input line 97.
\symmdscr=\mathgroup7
LaTeX Font Info: Overwriting symbol font `mdscr' in version `bold'
(Font) OMS/mdput/m/n --> OMS/mdput/b/n on input line 103.
LaTeX Font Info: Redeclaring math alphabet \mathfrak on input line 109.
LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `normal'
(Font) U/euf/m/n --> U/xmdeuf/m/n on input line 109.
LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
(Font) U/euf/b/n --> U/xmdeuf/m/n on input line 109.
LaTeX Font Info: Overwriting math alphabet `\mathfrak' in version `bold'
(Font) U/xmdeuf/m/n --> U/xmdeuf/b/n on input line 110.
LaTeX Info: Redefining \frak on input line 111.
LaTeX Font Info: Overwriting symbol font `operators' in version `normal'
(Font) OT1/lmr/m/n --> OT1/mdput/m/n on input line 121.
LaTeX Font Info: Overwriting symbol font `letters' in version `normal'
(Font) OML/lmm/m/it --> OML/mdput/m/it on input line 122.
LaTeX Font Info: Overwriting symbol font `symbols' in version `normal'
(Font) OMS/lmsy/m/n --> OMS/mdput/m/n on input line 123.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `normal'
(Font) OMX/lmex/m/n --> OMX/mdput/m/n on input line 124.
LaTeX Font Info: Overwriting symbol font `operators' in version `bold'
(Font) OT1/lmr/bx/n --> OT1/mdput/b/n on input line 126.
LaTeX Font Info: Overwriting symbol font `letters' in version `bold'
(Font) OML/lmm/b/it --> OML/mdput/b/it on input line 127.
LaTeX Font Info: Overwriting symbol font `symbols' in version `bold'
(Font) OMS/lmsy/b/n --> OMS/mdput/b/n on input line 128.
LaTeX Font Info: Overwriting symbol font `largesymbols' in version `bold'
(Font) OMX/lmex/m/n --> OMX/mdput/b/n on input line 129.
LaTeX Font Info: Overwriting math alphabet `\mathrm' in version `normal'
(Font) OT1/mdput/m/n --> T1/mdput/m/n on input line 131.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `normal'
(Font) OT1/lmr/bx/n --> T1/mdput/b/n on input line 132.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `normal'
(Font) OT1/lmr/m/it --> T1/mdput/m/it on input line 133.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `normal'
(Font) OT1/lmss/m/n --> T1/lmss/m/n on input line 134.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `normal'
(Font) OT1/lmtt/m/n --> T1/lmtt/m/n on input line 135.
LaTeX Font Info: Overwriting math alphabet `\mathrm' in version `bold'
(Font) OT1/mdput/b/n --> T1/mdput/b/n on input line 137.
LaTeX Font Info: Overwriting math alphabet `\mathbf' in version `bold'
(Font) OT1/lmr/bx/n --> T1/mdput/b/n on input line 138.
LaTeX Font Info: Overwriting math alphabet `\mathit' in version `bold'
(Font) OT1/lmr/bx/it --> T1/mdput/b/it on input line 139.
LaTeX Font Info: Overwriting math alphabet `\mathsf' in version `bold'
(Font) OT1/lmss/bx/n --> T1/lmss/b/n on input line 140.
LaTeX Font Info: Overwriting math alphabet `\mathtt' in version `bold'
(Font) OT1/lmtt/m/n --> T1/lmtt/b/n on input line 141.
\symlettersupright=\mathgroup8
LaTeX Font Info: Overwriting symbol font `lettersupright' in version `bold'
(Font) OML/mdput/m/n --> OML/mdput/b/n on input line 144.
LaTeX Font Info: Redeclaring math alphabet \mathrm on input line 145.
LaTeX Font Info: Overwriting math alphabet `\mathcal' in version `normal'
(Font) OMS/mdput/m/n --> OMS/mdput/m/n on input line 167.
("C:\Program Files\MiKTeX 2.9\tex\latex\xkeyval\xkeyval.sty"
Package: xkeyval 2014/12/03 v2.7a package option processing (HA)
("C:\Program Files\MiKTeX 2.9\tex\generic\xkeyval\xkeyval.tex"
("C:\Program Files\MiKTeX 2.9\tex\generic\xkeyval\xkvutils.tex"
\XKV@toks=\toks28
\XKV@tempa@toks=\toks29
)
\XKV@depth=\count100
File: xkeyval.tex 2014/12/03 v2.7a key=value parser (HA)
))
LaTeX Font Info: Try loading font information for T1+mdput on input line 186
.
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdput\t1mdput.fd"
File: t1mdput.fd 2013/08/29 Fontinst v1.933 font definitions for T1/mdput.
)
LaTeX Font Info: Font shape `T1/mdput/m/n' will be
(Font) scaled to size 10.29301pt on input line 186.
LaTeX Font Info: Redeclaring math accent \widetilde on input line 449.
LaTeX Font Info: Redeclaring math accent \widehat on input line 450.
Now handling font encoding MDA ...
... no UTF-8 mapping file for font encoding MDA
\symmathdesignA=\mathgroup9
LaTeX Font Info: Overwriting symbol font `mathdesignA' in version `bold'
(Font) MDA/mdput/m/n --> MDA/mdput/b/n on input line 491.
LaTeX Font Info: Overwriting encoding scheme math defaults on input line 493
.
Now handling font encoding MDB ...
... no UTF-8 mapping file for font encoding MDB
\symmathdesignB=\mathgroup10
LaTeX Font Info: Overwriting symbol font `mathdesignB' in version `bold'
(Font) MDB/mdput/m/n --> MDB/mdput/b/n on input line 498.
LaTeX Info: Redefining \bold on input line 510.
LaTeX Font Info: Redeclaring math accent \widetilde on input line 532.
LaTeX Font Info: Redeclaring math accent \widehat on input line 533.
\rulethickness=\skip49
)
("C:\Program Files\MiKTeX 2.9\tex\latex\base\fontenc.sty"
Package: fontenc 2017/04/05 v2.0i Standard LaTeX package
("C:\Program Files\MiKTeX 2.9\tex\latex\base\t1enc.def"
File: t1enc.def 2017/04/05 v2.0i Standard LaTeX file
LaTeX Font Info: Redeclaring font encoding T1 on input line 48.
)))
("C:\Program Files\MiKTeX 2.9\tex\latex\geometry\geometry.sty"
Package: geometry 2010/09/12 v5.6 Page Geometry
("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\ifpdf.sty"
Package: ifpdf 2017/03/15 v3.2 Provides the ifpdf switch
)
("C:\Program Files\MiKTeX 2.9\tex\generic\oberdiek\ifvtex.sty"
Package: ifvtex 2016/05/16 v1.6 Detect VTeX and its facilities (HO)
Package ifvtex Info: VTeX not detected.
)
("C:\Program Files\MiKTeX 2.9\tex\generic\ifxetex\ifxetex.sty"
Package: ifxetex 2010/09/12 v0.6 Provides ifxetex conditional
)
\Gm@cnth=\count101
\Gm@cntv=\count102
\c@Gm@tempcnt=\count103
\Gm@bindingoffset=\dimen113
\Gm@wd@mp=\dimen114
\Gm@odd@mp=\dimen115
\Gm@even@mp=\dimen116
\Gm@layoutwidth=\dimen117
\Gm@layoutheight=\dimen118
\Gm@layouthoffset=\dimen119
\Gm@layoutvoffset=\dimen120
\Gm@dimlist=\toks30
("C:\Program Files\MiKTeX 2.9\tex\latex\geometry\geometry.cfg")) (test.aux)
\openout1 = `test.aux'.
LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 11.
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for TS1/cmr/m/n on input line 11.
LaTeX Font Info: Try loading font information for TS1+cmr on input line 11.
("C:\Program Files\MiKTeX 2.9\tex\latex\base\ts1cmr.fd"
File: ts1cmr.fd 2014/09/29 v2.5h Standard LaTeX font definitions
)
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for MDA/cmr/m/n on input line 11.
LaTeX Font Info: Try loading font information for MDA+cmr on input line 11.
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdacmr.fd"
File: mdacmr.fd
)
LaTeX Font Info: ... okay on input line 11.
LaTeX Font Info: Checking defaults for MDB/cmr/m/n on input line 11.
LaTeX Font Info: Try loading font information for MDB+cmr on input line 11.
("C:\Program Files\MiKTeX 2.9\tex\latex\mathdesign\mdbcmr.fd"
File: mdbcmr.fd
)
LaTeX Font Info: ... okay on input line 11.
Package mathdesign/mdput Warning: Package 'amssymb' shouldn't be used in conjon
ction with package mdput, on input line 11.
Package mathdesign/mdput Warning: Package 'amsfonts' shouldn't be used in conjo
nction with package mdput, on input line 11.
*geometry* driver: auto-detecting
*geometry* detected driver: pdftex
*geometry* verbose mode - [ preamble ] result:
* driver: pdftex
* paper: a4paper
* layout: <same size as paper>
* layoutoffset:(h,v)=(0.0pt,0.0pt)
* modes:
* h-part:(L,W,R)=(89.62709pt, 418.25368pt, 89.6271pt)
* v-part:(T,H,B)=(101.40665pt, 591.5302pt, 152.11pt)
* \paperwidth=597.50787pt
* \paperheight=845.04684pt
* \textwidth=418.25368pt
* \textheight=591.5302pt
* \oddsidemargin=17.3571pt
* \evensidemargin=17.3571pt
* \topmargin=-7.86334pt
* \headheight=12.0pt
* \headsep=25.0pt
* \topskip=11.0pt
* \footskip=30.0pt
* \marginparwidth=59.0pt
* \marginparsep=10.0pt
* \columnsep=10.0pt
* \skip\footins=10.0pt plus 4.0pt minus 2.0pt
* \hoffset=0.0pt
* \voffset=0.0pt
* \mag=1000
* \@twocolumnfalse
* \@twosidefalse
* \@mparswitchfalse
* \@reversemarginfalse
* (1in=72.27pt=25.4mm, 1cm=28.453pt)
[1
{C:/Users/Louis/AppData/Local/MiKTeX/2.9/pdftex/config/pdftex.map}] (test.aux)
)
Here is how much of TeX's memory you used:
4331 strings out of 493312
56472 string characters out of 3138899
109834 words of memory out of 3000000
7811 multiletter control sequences out of 15000+200000
13043 words of font info for 19 fonts, out of 3000000 for 9000
1141 hyphenation exceptions out of 8191
34i,4n,35p,250b,117s stack positions out of 5000i,500n,10000p,200000b,50000s
!pdfTeX error: pdflatex (file md-utr8y): Font md-utr8y at 618 not found
==> Fatal error occurred, no output PDF file produced!
Louise17
Utilisateur
 
Messages: 6
Inscription: Samedi 18 Février 2012, 19:59
Statut actuel: Post-bac | Licence

Publicité

Re: Document qui ne produit pas de PDF - Nouvel ordinateur

Messagepar kojak » Jeudi 07 Décembre 2017, 07:37

Bonjour,

le problème vient de là
Code: Tout sélectionner
(file md-utr8y): Font md-utr8y at 618 not found
et la source est ici :
Code: Tout sélectionner
\usepackage[utopia]{mathdesign}%

Commente le ou met autre chose et ça devrait compiler.

Ensuite, d'après ce qu'on peut lire sur le net, le pb viendrait de l'installation de Miktex sans le MiKTeX Package Manager : voir ici
pas d'aide par MP
kojak
Modérateur
 
Messages: 10339
Inscription: Samedi 18 Novembre 2006, 19:50
Statut actuel: Actif et salarié | Enseignant

Re: Document qui ne produit pas de PDF - Nouvel ordinateur

Messagepar balf » Jeudi 07 Décembre 2017, 11:14

Il est en effet assez fréquent, avec MiKTeX, qu'une police, correctement installée avec MiKTeX Package Manager, avec fichier .map, et mention de la police dans updmap.cfg, produise un tel message d'erreur, pour signaler qu'elle n'arrive pas à fabriquer les fichier .pk ou .mf — ce qui n'a pas lieu d'être pour des polices postscript.

C'est simplement que les diverses bases de données desdites polices (psfonts.map, pdftex.map et toute la parentèle) n'ont pas été actualisées. Il faut donc le faire soi-même, en ligne de commande, au moyen de updmap --admin --verbose (la dernière option est là pour afficher ce qu'il se passe).

B. A.
balf
Zetta-utilisateur
 
Messages: 3663
Inscription: Mercredi 02 Janvier 2008, 23:18
Statut actuel: Actif et salarié | Maître de conférence


Retourner vers LaTeX

 


  • Articles en relation
    Réponses
    Vus
    Dernier message

Qui est en ligne

Utilisateurs parcourant ce forum: Google [Bot], Proximic [Spider] et 23 invités